Dales Agri Sales Agency, Hexham, Northumberland: Duncan Seed Drills

Duncan

SEED DRILLS

ECO SEEDER



DUAL BOX MODEL		SINGLE BOX MODEL

The Duncan Eco Seeder is a Coil Tine Tee-boot drill which can be operated as a trailing or a 3 point linkage machine. The seed box is mounted on a
robust frame accommodating large diameter tyres for the arable situation. The depth of the ground engaging components on the 3 point linkage machine
is controlled by adjusting turnbuckles fitted to each wheel leg. For the trailing machine, the depth is controlled by using the hydraulic rams and depth
control collars on each ram. The quality peg roller seeder system handles all seeds from turnip and rape through to peas and maize. The seeders are
driven from the groundwheels via a jockey wheel system and variable speed gearbox. For transport the drive is easily disconnected by raising the drill to
its transport height.

The gearbox, pegged seed rollers and seeder flaps are set to give the desired seed rate. The coil tine and tee-boot create the seed bed. Seed flows down
the flexible tubes between seeder and tee-boot units, and drops into the prepared seed bed.


	Easy to adjust gearbox with good sewing range		Seed depth control is achieved with simple clip over spacers on the ram spear		25mm square coil tines for strength and the Duncan 'T' boots provide an excellent seed bed


This weight kit including scales comes as standard		Drive to the gearbox is taken from the ground wheel via a sprung jockey wheel		Stainless steel agitator shaft is standard to help prevent seed compaction


	Seed is diverted into these trays for easy and accurate calibration		The bin lid opens to a full 90 degrees		Duncan 'T' boots have extra strength with Ni-hard steel and a tungsten tile on the leading edge


Front disc openers are available as an option		This rear footboard is standard equipment		Dual box is a two in one bin

SEED DRILLS

RENOVATOR MK3

The Duncan ‘Renovator’ is a Coil Tine Tee-boot drill. The box is mounted on a robust frame accommodating large diameter tyres for the
arable situation. The ground engaging components are controlled by a hydraulic ram and rocker arm system, giving ample control on
ground pressure, good transport clearance and contour following ability. Sowing depth is controlled by adjusting the hydraulic ram as
required. The quality peg roller seeder system handles all seeds from turnip and rape through to peas and maize. The seeders are driven
from the groundwheels via a jockey wheel system and variable speed gearbox. For transport the drive is easily disconnected by raising
the drill to its transport height.

The gearbox, pegged seed rollers and seeder flaps are set to give the desired seed rate. The coil tine and teeboot create the seed bed.
Seed flows down the flexible tubes between seeder and tee-boot units, and drops into the prepared seed bed.


	Easy-to-adjust variable speed gearbox		Depth control is achieved with simple clip-over spacers on the ram spear. Fine screw adjuster on ram spear		Large 320mm diam discs with special turbotilth flutes


Boxes have vee bottoms for better seed flow to seeders and also agitators to help stop seed bridging		Seed is diverted into these trays for easy and accurate calibration - with handy calibration tray support brackets		Drive to gearbox is taken from ground wheel via smaller sprung wheel. Both main wheels have scrapers for cleaning


	1" square coil tines and the Baker Boot provide an excellent seed bed. Individual tubes for all boxes		Wide rear footboard with handy step for easy access		Optional hydraulic rams for both the draw bar and disc openers


The wheels are behind the outermost tine for maximum sowing width		Duncan 'T' Boots extra strength Ni-Hard steel with tungsten tile on leading edge		Pivoting towing eye for better oscillation between tractor and drill. Safety chains are standard